امروز: پنجشنبه 9 فروردین 1403
دسته بندی محصولات
بخش همکاران
دسته بندی صفحات
ضمانت خرید
https://www.uplooder.net/ https://www.uplooder.net/

ترجمه مقاله ساختار سرامیك همراه با متن لاتین

ترجمه مقاله ساختار سرامیك همراه با متن لاتین دسته: مقالات ترجمه شده
بازدید: 132 بار
فرمت فایل: doc
حجم فایل: 1311 کیلوبایت
تعداد صفحات فایل: 20

ترجمه مقاله ساختار سرامیك همراه با متن لاتین در 20 صفحه ورد قابل ویرایش

قیمت فایل فقط 6,500 تومان

خرید

ترجمه مقاله ساختار سرامیك همراه با متن لاتین در 20 صفحه ورد قابل ویرایش

ساختار  Biepitaxid، پیوند josephson و SQUIDs : ساختار و ویژگی‌های اتصال یا پیوند josephson و SQUIDs،   yBCo/CeO2/Mgo Biepitaxid را بررسی و گزارش كردیم، در اینجا CeO2 به عنوان یك لایه استفاده شده تا یك محدوده یا مرز Biepitaxid برای بلور یا ذره ایجاد كند. سطوح تابكاری نشده لایه CeO2 و سطح تابكاری شده آن توسط میكروسكوپ اتر یا (AFM) بررسی شدند. دمای مقاومت لایه نازك yBCo/CeO2/Mgo نشان می‌دهد كه فرآیند تابكاری برای لایه CeO2 به منظور ایجاد لایه فیلم YBCo با كیفیت خوب ضروری است. منحنی ولتاژ جریان اتصال یا پیوند josephson عملكرد مربوط به مقاومت اتصال (RSJ) را نشان می‌دهد. بعلاوه هر دو مرحله عددی یا انتگرال و یا نیمه انتگرال Shapiro در میدان مغناطیسی بكاربرده شده صفر مشاهده شد نوسان ولتاژ مغناطیسی مدولی شده نیز برای SQUIDs دیده می‌شود.

1-   مقدمه: بدلیل توسعه و پیشرفت مدارهای مجتمع ابررسانا، High-T، اتصالات ابررسانای josephson به شكل گسترده‌ای مورد بررسی و آزمایش واقع شدند. به منظور بدست آوردن اتصالات josephson قابل كنترل و قابل دستیابی به انواع مختلف اتصالات مانند محدوده دارای لبه پله‌ای، SNS یا اساس و پایه bicrystaf استفاده شد. بهرحال این نوع مرزها معمولاً طی زمان ساخت با فرآیندهای بسیار زیادی درگیر هستند. برای ساده‌تر كردن فرآیند ساخت، اتصالات josephson محدوده دانه Biepitaxid مورد بررسی واقع شد. در این كار، CeCo2 انتخاب شد تا یك لایه برای محدوده ذره   Biepitaxid باشد و روش ساده و شیمیایی حكاكی بجای فرزكاری آهن استفاده شد تا باعث جدا شدن نیمی از لایه CeCo2 از پایه Mgo شود.

SQUIDs و اتصالات josephson  Biepitaxid را ساختیم. بعضی از ویژگی‌های جریان ولتاژ برای اتصالات josephson و SQUIDs مورد بررسی واقع شد. همچنین نوسان ولتاژ تقسیم شده در میدان مغناطیسی برای SQUIDs نیز بررسی شد.

2- شرح تجربی و آزمایشی: یك سیستم آبكاری فلز مغناطیسی rf خارج از محور برای جدا كردن تمام لایه‌ها در این مبحث استفاده شده است. CeCo2 در دمای OC750 برروی سطح Mgo كه با یك لایه (yBCo)800 A-thick  پوشیده شده، آبكاری شد. سپس لایه yBCo /  CeCo2 با استفاده از اسید هیدروكلریك جدا شد. بعد از آن، این پایه و اساس در دمای OC1100 به مدت 10 ساعت تابكاری شد. برای بررسی تغییرات سطح CeCo2، ساختار سطحی لایه‌های CeCo2 تابكاری شده و تابكاری نشده با میكروسكوپ‌های (AFM) بررسی شدند و سپس یك لایه (yBCo)2000 A-thick   برروی سطح تابكاری شده قرار داده شد، رسوب‌گذاری شده بعلاوه لایه نازك yBCo با یك محدوده یا مرز Biepitaxid توسط فتولیتوگرافی در یك اتصال josephson با 5pm پهنا یا SQUIDs با یك ناحیه سوراخ  40*20 و پهنای اتصال  بصورت طرح و نقش قرار داده شد. برای بررسی واكنش‌های میكرو ویوی اتصال، یك میكرو ویو با استفاده از آنتن دیود به این اتصال تابانده شد. برای بررسی نوسان بخش بخش میدان مغناطیسی، SQUID برروی یك سولئوئید كه دارای میدان مغناطیسی موازی با سطح SQUID بود نصف شد. یك روش معمولی چهارمرحله‌ای برای اندازه‌گیری و بخش الكتریكی استفاده شد. معیار برای جریان اصلی در این مبحث  بود.

شكل 1- مقاومت دمای لایه نازك yBCo برروی a، سطح Mgo، b، سطح تابكاری نشده Mgo / CeCo2.

3- بحث و نتیجه‌گیری: بخ منظور تأیید ویژگی خوب و مناسب لایه نازك yBCo ، مقاومت دمائی لایه نازك yBCo برروی پایه Mgo و لایه CeCo2 تابكاری نشده همانند شكل 1 اندازه‌گیری شد. لایه yBCo برروی پایه Mgo عملكرد ابررسانایی با  نشان می‌دهد. بهرحال لایه yBCo برروی لایه CeCo2 تابكاری نشده مقاومت نیمه رسانایی با افت دمای حدود k82 را نشان می‌دهد. این مقاومت نیمه رسانایی ممكن است بدلیل عنوان شده در زیر باشد. ابتدا، تركیب  yBCo تغییر می‌كند، تا برروی لایه CeCo2 تابكاری نشده آبكاری شود. ثانیاً بلور یا ذره yBCo همسطح نمی‌باشند. برای بررسی اولیه نقطه، انحراف یا خمش پرتو x برای مورد نمونه تابكاری نشده و مشخص می‌شود و در شكل 2 نشان داده شده است. مشاهده می‌شود كه تمام سطوح {o,o,n} برای yBCo و CeCo2 واضح و مشخص هستند. این موضوع نشان می‌دهد كه ساختار و تركیب لایه‌های CeCo2 و yBCo دقیق و درست است و اولین مورد ویژه و اختصاصی است. سپس سطح لایه نازك yBCo برروی لایه تابكاری نشده CeCo2 با میكروسكوپ اتمی (AFM) بررسی می‌شود كه در شكل 3 نشان داده شده است.

Fabrication of Biepitaxial YBazCu307_,
Josephson Junctions and SQUIDS
S. Y. Yang’, H. E. Horngl, W. L. Lee2, H. W. Yu2, and H. C. Yang2
1 Department of Physics, National Taiwan Normal University, Taipei, Taiwan 117, R.O.C.
2Department of Physics, National Taiwan University, Taapei, Taiwan 106, R.O.C.
(Received December 20, 1997)
We reported the fabrication and characteristics of biepitaxial YBCO/CeOz/MgO
Josephson junctions and SQUIDS, here Ce02 was used as a seed layer to create the biepitaxial
grain boundary. The surfaces of the unannealed CeO2 layer and the annealed
one were probed by the atomic force microscope (AFM). The temperature dependent
resistance of YBCO/Ce02/MgO thin film reveals that the annealing process for CeO2
layer is crucial for the quality of the YBCO thin film. The voltage-current curves
of Josephson junctions exhibit the resistively shunted junction (RSJ) behavior. Furthermore,
both the integral and half-integral Shapiro steps were observed under zero
applied magnetic field. The magnetic modulated voltage oscillation was also found for
the SQUIDS.
PACS. 74.50.+r - Proximity effects, weak links, tunneling phenomena, and Josephson
effects.
_ PACS. 74.76.-w - Superconducting films.
I. Introduction
Owing to the development of the superconducting integrated circuits, high-T, superconducting
Josephson junctions have been examined widely. In order to obtain the
controllable and reproducible Josephson junctions, various types of junctions are used,
such as step-edge boundary [l], SNS [2] or bicrystal substrate [3]. However, these kinds
of boundaries usually involve too many processes during fabrication [4,5]. To simplify the
fabrication processes, biepitaxial grain boundary Josephson junctions were studied. In this
work, CeO2 was chosen to be a seed layer for the biepitaxial YBazCusO7_, grain boundary
and an easy chemical etching method instead of conventional ion milling was used to lift
off half of the CeO2 layer on MgO substrate. We fabricated the biepitaxial YBa2Cu307_y
Josephson junctions and SQUIDS. Some voltage-current characteristics for the Josephson
junctions and SQUIDS were investigated. And also, the magnetic field modulated voltage
oscillation for the SQUIDS was checked.
II. Experimental details
An off-axis rf magnetron sputtering system was used to deposit all films in this work.
Ce02 was sputtered at 750 “C onto the MgO(001) substrate which was covered partly by
409 @ 1998 THE PHYSICAL SOCIETY
OF THE REPUBLIC OF CHINA
410 FABRICATION OF BIEPITAXIAL YBazCuaO-i_, VOL. 36
a 800 A-thick YBa$usOr_y (YBCO) 1 ayer. Next, the CeOz/YBCO layer was lifted off by
using hydrochloric acid. Then, this substrate was annealed at 1100 “C for 10 hours. To
examine the changes of the CeOz surface, both the surface morphologies of the annealed
and the unannealed Ce02 layers were taken by atomic force microscope (AFM) followed by
depositing a 2000 A-thick YBCO layer onto the annealed substrate. Moreover, the YBCO
thin film with a biepitaxial grain boundary was patterned photolithographically into a 5
pm-wide Josephson junction or a SQUID with the hole area of 20 x 40 pm2 and the junction
width of 5 pm. To investigate the microwave responses of the junction, a microwave was
guided to the junction by using a diode antenna. For checking the magnetic field modulated
voltage oscillation, the SQUID was mounted in a solenoid which provided a magnetic field
perpendicular to the plane of the SQUID. The traditional four-probe method was used for
electric measurements and the criterion voltage for the critical current was 1 JLV in this
work.
III. Results and discussion
In order to confirm the good quality of the YBa2CusOr_, (YBCO) thin film, the
temperature dependent resistances of YBCO thin film on the MgO substrate and that on
the unannealed CeO2 layer were measured, as shown in Fig. 1. The YBCO film on the
MgO substrate exhibits a superconducting behavior with T,,,,, = 84.2 K. However, the
YBCO film on the unannealed CeO2 layer shows a semiconducting resistive behavior with
a little drop at temperature around 82 K. This semiconducting resistive behavior may be
due to the following causes. First, the composition of YBCO is changed as it was sputtered
on the unannealed CeOa layer. Secondly, the grain of the YBCO is not planar. To check
the first point, powder x-ray diffraction pattern was detected for the unannealed sample
and shown in Fig. 2. It was observed that all the peaks of {O,O,n} planes for YBCO and
CeOz are clear and sharp. This implies that the compositions for YBCO and CeOz layers
are correct and hence the first cause is exclusive. Next, the surface profile of the YBCO
thin film on the unannealed CeO2 layer was probed by the atomic force microscope (AFM),
as shown in Fig. 3. It was found that many spiral grains appear on the surface of the
YBCO thin film, as indicated by arrows. The spiral grains result from the dislocation of
the layered structure in YBCO. Since the transport properties of YBCO are dominated
by its layered structure and become poor as the layered structure is deformed., Hence, the
spiral grains are responsible for the semiconducting resistive behavior of the YBCO thin
film on the unannealed CeOz layer.
To improve the quality of YBCO thin film on the Ce02 layer, the MgO substrate
covered with a CeOz layer was annealed at 1100 “C for 10 hours under one atmosphere
of oxygen before depositing the YBCO thin film. The resistance versus temperature for
the YBCO thin film on the annealed CeO;! layer was shown in the inset of Fig. l(b).
It was observed that the YBCO thin film reveals a good superconducting behavior with
Tc,zero -- 87.2 K. Hence, the annealing process for the CeO2 layer is essential for improving
the quality of YBCO/Ce02 thin films. In order to investigate the changes of the CeO2
layers before and after being annealed, the surface images of the CeO2 layers were probed
by AFM and were shown in Fig. 4. Some surface features are listed in Table I. It was found
that the grain size becomes much larger, meanwhile, the CeO2 surface turns out rougher

قیمت فایل فقط 6,500 تومان

خرید

برچسب ها : تحقیق ترجمه مقاله ساختار سرامیك همراه با متن لاتین , پروژه ترجمه مقاله ساختار سرامیك همراه با متن لاتین , مقاله ترجمه مقاله ساختار سرامیك همراه با متن لاتین , دانلود تحقیق ترجمه مقاله ساختار سرامیك همراه با متن لاتین , ترجمه مقاله ساختار سرامیك همراه با متن لاتین , ترجمه , ساختار سرامیك , متن لاتین

نظرات کاربران در مورد این کالا
تا کنون هیچ نظری درباره این کالا ثبت نگردیده است.
ارسال نظر